Maintenance
C² Degrease
Industrial cleaner and degreaser that also removes many adhesive and paint residues.
Why choose C²? →Stock availability
Contact us for availability
When to choose this product
For concrete floors with oil, grease, adhesive residues or tyre marks. Helps restore a clean surface for maintenance or further treatment.
Product advantages
- An industrial-strength cleaner and degreaser.
- Removes many adhesive and paint residues.
- An alternative to solvent-based degreasers for industrial cleaning.
More advantages
- Emulsifies grease and oils and removes many adhesive or paint residues. Water-soluble concentrate with readily biodegradable ingredients; can be applied by brush, mop or low-pressure sprayer.
Technical information
Typical technical data
| Appearance | Clear amber liquid |
|---|---|
| Specific gravity | 1.02 |
| pH | 6-8 |
| Active content | Not applicable |
| Total solids | Not applicable |
| VOC content | <0.5% |
| Shelf life in a tightly sealed, unopened container | 3 years |
| Flash point | >100 °C (ASTM D3278) |
Typical values from the manufacturer’s TDS; application details are in the full instructions.
Preparation and working conditions
Start dry; do not pre-wet. Remove loose debris. Dilute at least 1 part product to 4 parts water. For heavy oil use 1:4, light oil up to 1:50, adhesive up to 1:19, and paint/sealer residues up to 1:9. For routine cleaning use 1:100–200; in auto-scrubbers dilute at least 1:50. Test the dilution.
Best cleaning results at 10°C or above. Allow frozen concrete to thaw; do not clean if freezing is expected during or after the work.
Equipment
Apply with a brush, mop or pump sprayer. Lift spent cleaner and loosened coating with a mop or wet vacuum.
Practical advice
Test a representative area with the equipment and preparation planned for the job. Let it dry before assessing the result and coverage.
Clean tools with fresh water before the product dries. Immediately wash splashes off glass, aluminium and other adjacent surfaces.
Storage and handling
Storage temperature7–38 °C
Store upright in sealed original containers in a cool, dry place. Close after dispensing. Follow local rules for unused product and packaging.
Choose products for your floor
We can help select compatible products, equipment and quantities for your project.