Preparation
C² Trowel Aid
Finishing aid that lubricates fresh concrete and extends working time in hot, windy or dry conditions.
Why choose C²? →Depends on surface porosity and finish. Confirm consumption on a test area.
Stock availability
Contact us for availability
When to choose this product
For finishing fresh concrete in heat, wind or low humidity. Improves surface lubrication and extends working time, reducing the need to add water to the surface.
Product advantages
- Enhances surface lubrication for easier and faster finishing.
- Increases the workable time in challenging conditions like high heat, wind, or low humidity.
- Reduces the need to add water to the surface, preserving the slab’s performance.
More advantages
- Improves lubrication and workable time in hot, windy or dry conditions. Reduces the need for added surface water and helps finish dry-shake hardeners when bleedwater is limited.
- Reduces evaporation-related surface problems, dusting and efflorescence. Supplied as a concentrate to reduce transport volume.
Technical information
Typical technical data
| Appearance | Milky liquid |
|---|---|
| Specific gravity | 1.07 |
| pH | 9.5 – 10.5 |
| Active content | 12% |
| Total solids | 18% |
| VOC content | 0 g/L |
| Shelf life in a tightly sealed, unopened container | 2 years |
| Flash point | Not applicable |
Typical values from the manufacturer’s TDS; application details are in the full instructions.
Preparation and working conditions
Surface and air temperature4–38 °C
Equipment
Use a low-pressure sprayer. Distribute evenly without puddles; avoid forming a fine mist.
Practical advice
Test a representative area with the equipment and preparation planned for the job. Let it dry before assessing the result and coverage.
After finishing, carry out the specified concrete curing procedure. Trowel Aid supports finishing but does not replace curing.
Clean tools with fresh water before the product dries. Immediately wash splashes off glass, aluminium and other adjacent surfaces.
Storage and handling
Storage temperature4–38 °C
Store upright in sealed original containers in a cool, dry place. Close after dispensing. Follow local rules for unused product and packaging.
Protect from freezing.
Choose products for your floor
We can help select compatible products, equipment and quantities for your project.