Preparation
C² Grind Aid+
Grinding aid that lifts slurry away from diamond tooling for faster concrete removal.
Why choose C²? →Stock availability
Contact us for availability
When to choose this product
For wet grinding of concrete floors. Helps lift slurry away from diamond tooling, reducing scratches and time spent on grinding steps.
Product advantages
- Extends the life of diamonds and shortens the project timeline.
- Reduces labor and tooling costs.
- Lifts and suspends slurry solids away from diamond tooling, allowing for faster bulk removal of concrete surface during grinding.
More advantages
- Reduces scratches from coarse diamond steps, helps harden the surface and makes slurry cleanup easier. Suitable for power-trowel polishing and other grinding systems, on new or existing concrete.
- Low odor and non-flammable according to the TDS. Follow the SDS for handling and personal protection.
Technical information
Typical technical data
| Appearance | Clear, colorless liquid |
|---|---|
| Specific gravity | 1.05 |
| pH | 11.3 |
| Active content | Not applicable |
| Total solids | Not applicable |
| VOC content | <0.5% |
| Shelf life in a tightly sealed, unopened container | 2 years |
| Flash point | >100 °C |
Typical values from the manufacturer’s TDS; application details are in the full instructions.
Preparation and working conditions
Surface and air temperature4–32 °C
Remove oil, grease and other contaminants. Work at a surface temperature of 4–32°C. Use Grind Aid+ undiluted for wet grinding only.
Equipment
Use a low-pressure sprayer. Distribute evenly without puddles; avoid forming a fine mist.
Practical advice
Test a representative area with the equipment and preparation planned for the job. Let it dry before assessing the result and coverage.
After each grinding stage, wash with water and collect the slurry with a wet vacuum. Before the final grinding stage, apply C² Hard or C² Hard Blend according to its own instructions.
Clean tools with fresh water before the product dries. Immediately wash splashes off glass, aluminium and other adjacent surfaces.
Storage and handling
Storage temperature7–38 °C
Store upright in sealed original containers in a cool, dry place. Close after dispensing. Follow local rules for unused product and packaging.
Choose products for your floor
We can help select compatible products, equipment and quantities for your project.