Preparation

1. Sweep or vacuum loose dirt and treat local stains first. Use above 4°C, preferably above 10°C. For routine cleaning mix 120 mL product with 10 L water.

Application

1. Clean with a mop or auto-scrubber using soft pads suitable for the finish; avoid aggressive pads on polished concrete. Collect the dirty solution and leave no puddles. Routine cleaning does not require rinsing; after deep cleaning or in food-handling areas, rinse with fresh water and collect it.

Drying and next steps

1. Clean tools with fresh water before the product dries. Immediately wash splashes off glass, aluminium and other adjacent surfaces.

Preparation

1. Sweep or vacuum loose dirt and treat local stains first. Use above 4°C, preferably above 10°C.

Mixing

1. For deeper cleaning use 120 mL C² Clean with 2–4 L water. Test the required dilution.

Application

1. Clean with a mop or auto-scrubber using soft pads suitable for the finish; avoid aggressive pads on polished concrete. Collect the dirty solution and leave no puddles. Routine cleaning does not require rinsing; after deep cleaning or in food-handling areas, rinse with fresh water and collect it.

Drying and next steps

1. Clean tools with fresh water before the product dries. Immediately wash splashes off glass, aluminium and other adjacent surfaces.